A-06Maintenance

Building Maintenance Schedule

Most leaks start as small maintenance jobs that were skipped: a blocked outlet, a split sealant joint, a gutter full of leaves. Follow the seasonal routine, generate a task list for the elements your building actually has and keep a record.

T-02Schedule

Through the year

Adjust the months to your climate; the order matters more than the dates.

  • Spring

    After winter

    Look for frost damage, lifted flashing, cracked render and sealant that split in the cold. Clear winter debris from roof outlets.



  • Before the rainy season

    Drains and falls

    Clear roof outlets, balcony drains and gutters, check that water runs away from the building and test downpipes with a bucket of water.



  • Summer

    Heat and sun

    Check exposed coatings for chalking, cracking and blisters; look at sealant on sunny facades. A good time to plan coating work in dry weather.



  • Autumn

    Leaves and gutters

    Clean gutters and outlets after the leaves have fallen and check gutter brackets and joints before winter storms.



  • Winter

    Freeze and condensation

    Watch for ice at gutters, condensation on cold walls and in roof spaces, and ventilate bathrooms and basements.

G-01Generator

Maintenance list generator

Tick the elements your building has and how often you want to check. The list is built in your browser; copy it into your calendar or building log.

Input

Elements

Output0 tasks

Tick at least one element.

T-03Schedule

What to inspect, element by element

Use it with the generator output as your walk-round sheet.

ElementLook atWarning signsRelated
Roof surfaceCoating or membrane, seams, edgesBlisters, cracks, splits, bare patchesMethods
Roof drains and outletsGrates, outlets, fallsPonding after two days, debris, rust stainsLeak finder
Parapets and upstandsCopings, flashing, upstand heightOpen joints, lifted flashing, cracksRoof membranes
Gutters and downpipesJoints, brackets, outletsOverflow marks, sagging, dripping joints—
Exterior wallsRender, brick, panel jointsCracks, damp patches, efflorescenceWall membranes
Window and door sealantPerimeter joints, sillsGaps, hard or split sealantSealing
Balcony drainsDrain, threshold, surfaceStanding water, cracked tile, stains belowMembrane on concrete
Bathroom jointsSilicone, grout, drainMould under sealant, loose tilesBathrooms
Basement wallsWall-floor joint, pipe entriesDamp, salts, musty smellBasement walls

Record

Keep a record

A simple log is the cheapest tool on this site. Date, photos taken from the same spot each time, what you found and what was done. It shows contractors how a problem developed and helps with insurance claims and owners' meetings.

  • —Photograph stains with a ruler or tape for scale
  • —Keep product names, data sheets and warranties together
  • —Note the weather on the days a leak appears

Q-07RFI log

Maintenance FAQ

RFI-01How often should a flat roof be inspected?

Response

Many manufacturers and maintenance guides suggest at least twice a year, plus after severe storms. Your membrane's warranty may set its own inspection conditions.

RFI-02Who maintains shared roofs in apartment buildings?

Response

That depends on your ownership rules, lease or owners' association documents. Check them, and report leaks to the building manager in writing.

RFI-03Does pressure washing damage coatings?

Response

It can. High pressure close up can lift coatings, open joints and force water into walls. Use low pressure and follow the coating maker's cleaning advice.

RFI-04When should a roof coating be recoated?

Response

When inspections show wear such as chalking, thin spots or exposed reinforcement, and within the maker's recoat guidance. Recoating a sound coating is usually cheaper than replacing a failed one.

Next sheet

Maintenance posts

Notes on keeping roofs, walls and basements in shape.